This student-friendly physics constants table gathers commonly used reference values for mechanics, electricity and magnetism, waves, thermodynamics, quantum physics, and astronomy. It also explains units, appropriate rounding, and how to decide whether a value should be supplied by your course or looked up independently.
Overview
A physics constant is a value used repeatedly because it describes a stable property of nature or a defined relationship between units. Reference values are slightly different: they may be useful standard approximations, such as the acceleration due to gravity near Earth’s surface, but they are not always universal constants.
Use the table as a starting point, not as a substitute for the question sheet, formula sheet, laboratory instructions, or calculator policy for your course. Exam boards and instructors may provide rounded values, use different symbols, or expect a particular approximation. When a supplied value conflicts with a memorized value, use the value specified for that assessment unless your instructor says otherwise.
| Quantity | Symbol | Recommended value | SI unit | Typical application |
|---|---|---|---|---|
| Acceleration due to gravity near Earth | g | 9.81 | m/s² | Weight, free fall, inclined planes |
| Gravitational constant | G | 6.67430 × 10−11 | N·m²/kg² | Newtonian gravity and orbital calculations |
| Speed of light in vacuum | c | 299,792,458 | m/s | Relativity, electromagnetic waves, photon energy |
| Elementary charge | e | 1.602176634 × 10−19 | C | Charge, current, electrons and ions |
| Vacuum permittivity | ε0 | 8.8541878128 × 10−12 | F/m | Coulomb’s law and electric fields |
| Vacuum permeability | μ0 | 1.25663706212 × 10−6 | N/A² | Magnetic fields and electromagnetic theory |
| Planck constant | h | 6.62607015 × 10−34 | J·s | Photon energy and quantum mechanics |
| Reduced Planck constant | ℏ | 1.054571817 × 10−34 | J·s | Angular momentum and wave mechanics |
| Boltzmann constant | kB | 1.380649 × 10−23 | J/K | Thermal energy and statistical mechanics |
| Avogadro constant | NA | 6.02214076 × 1023 | mol−1 | Moles, particles, and molar quantities |
| Universal gas constant | R | 8.314462618 | J/(mol·K) | Ideal-gas and thermodynamics equations |
| Electron mass | me | 9.1093837 × 10−31 | kg | Atomic and quantum calculations |
| Proton mass | mp | 1.6726219 × 10−27 | kg | Nuclear and particle physics |
| Neutron mass | mn | 1.6749275 × 10−27 | kg | Nuclear and particle physics |
| Standard atmospheric pressure | patm | 101,325 | Pa | Fluids, gases, and pressure conversions |
| Astronomical unit | AU | 1.495978707 × 1011 | m | Distances within planetary systems |
| Light-year | ly | 9.4607 × 1015 | m | Interstellar and astronomical distances |
| Solar mass | M☉ | 1.9885 × 1030 | kg | Stars, galaxies, and orbital models |
Values are shown with more digits than most introductory problems require so that you can round at the end of a calculation. The gravitational constant, particle masses, and several astronomical reference values are measured quantities and should not be treated as infinitely exact. By contrast, some SI defining constants, including c, h, e, kB, and NA, have exact numerical values in the SI system. Exact definition does not mean that every experiment or final answer should display every digit.
Maintenance cycle
Reference tables deserve a scheduled review because notation, accepted digits, and assessment conventions can change even when the underlying physics does not. A practical maintenance cycle is to check the table at the beginning of each academic year, before a major exam season, and whenever a course specification or formula sheet is revised.
During a review, check four things:
- Numerical values: confirm measured constants and recommended reference values against a reliable physics or standards reference.
- Definitions: distinguish exact SI-defined constants from measured quantities and classroom approximations.
- Notation: verify symbols, subscripts, superscripts, and unit formatting. For example, g for local gravitational acceleration is not the same quantity as G, the gravitational constant.
- Assessment use: compare the table with the current formula sheet or data booklet used by the learner’s course. Avoid claiming that a constant is always provided or always expected to be memorized.
For a broader treatment of prefixes, dimensions, and conversions, use the guide to SI units and dimensional analysis. A reference table is most useful when students can also check whether an answer has sensible dimensions.
Signals that require updates
Update the article or classroom copy when a trusted reference changes a recommended digit, when a symbol becomes ambiguous in the target curriculum, or when readers repeatedly search for a value that is missing. A change in course terminology is also a reason to add a note, especially if one subject uses a symbol differently from another.
Search behavior can reveal practical gaps: students may need a compact list of electron-volts, nanometers, or astronomical units rather than another long explanation of theory. Add those entries only when they support the article’s purpose, and label derived conversions clearly. For example, the electron-volt is a unit of energy, not a fundamental constant; its conversion follows from the elementary charge.
Visual learners may also benefit from pairing this table with a mechanics tutorial, an electricity and magnetism lesson, or a quantum physics explainer. The table answers “which value?” while a worked video or diagram answers “why does this value belong in the equation?”
Common issues
Confusing g with G
Use g for the local acceleration due to gravity, commonly approximated as 9.81 m/s² near Earth’s surface. Use G in the universal law of gravitation. They have different units and differ by many orders of magnitude.
Rounding too early
Keep several guard digits during intermediate calculations, then round the final result to match the least precise measured input or the instruction for the problem. If a problem gives g as 9.8 m/s², using a longer value may create an answer that appears more precise than the data justify.
Mixing units
Convert quantities before substituting them. Common errors include using grams with kilograms, centimeters with meters, hours with seconds, or electron-volts where joules are required. A quick dimensional check often catches these mistakes. The units, dimensions, and significant figures reference provides a useful follow-up.
Treating reference values as universal
Local gravity depends on location, and atmospheric pressure depends on conditions. Use the value named by the problem rather than silently replacing it with a preferred number. In laboratory work, record the value and source used so another reader can reproduce the calculation.
When to revisit
Return to this table before starting a new unit, before an exam, and whenever a worked answer seems inconsistent with yours. For homework, first copy the given values into a short “known quantities” list, including units and significant figures. Then identify which constant the equation requires, convert units, calculate with unrounded values, and round only at the end.
For revision, make a two-column note: one side shows the constant and unit; the other explains the physical situation in which it appears. Test yourself by covering the values and identifying whether a problem concerns gravity, charge, thermal energy, photons, or astronomical distance. When an answer is wrong, check the symbol, exponent, unit, and rounding before redoing the entire problem.
Finally, revisit the table at the next scheduled academic-year review or when your course publishes a new data sheet. That small habit keeps a physics reference table accurate, consistent, and useful for problem solving rather than turning it into a collection of numbers to memorize.