Physics units are more than labels attached to numbers: they describe what a quantity measures and provide a fast way to detect calculation errors. This practical guide explains SI base and derived units, metric prefixes, common conversions, temperature scales, and dimensional analysis, with worked examples from mechanics, electricity, waves, and thermodynamics.
Overview
The International System of Units, or SI, gives physics a consistent language for measurement. Most classroom formulas are designed to work directly with SI units. Before substituting values, check that distance is in metres (m), time in seconds (s), mass in kilograms (kg), electric current in amperes (A), and temperature in kelvin (K) when absolute temperature is required.
A unit conversion changes the way a quantity is written without changing the physical quantity itself. For example, 2.5 km and 2,500 m describe the same distance. Dimensional analysis goes one step further: it checks whether the units on both sides of an equation are compatible. It cannot prove that a formula is physically correct, but it can reveal many incorrect substitutions, missing factors, and calculator-entry mistakes.
Use this guide as a reference when beginning a new physics topic, checking homework, preparing a lab report, or reviewing formula-based exam questions. For a related approach to reading measurements and slopes, see How to Read Physics Graphs.
What to track
SI base quantities
Many physics units can be expressed using seven SI base units. Introductory problems most often use the first five listed below, while the mole and candela appear more often in chemistry, thermal science, or specialized contexts.
| Physical quantity | SI base unit | Symbol |
|---|---|---|
| Length | metre | m |
| Mass | kilogram | kg |
| Time | second | s |
| Electric current | ampere | A |
| Thermodynamic temperature | kelvin | K |
| Amount of substance | mole | mol |
| Luminous intensity | candela | cd |
Common derived units
Derived units are combinations of base units. Learning both forms is useful because a problem may give a value in joules or newtons while a dimensional check requires base units.
| Quantity | Named unit | Symbol | Base-unit form |
|---|---|---|---|
| Force | newton | N | kg·m·s−2 |
| Energy or work | joule | J | kg·m2·s−2 |
| Power | watt | W | kg·m2·s−3 |
| Pressure | pascal | Pa | kg·m−1·s−2 |
| Electric charge | coulomb | C | A·s |
| Voltage | volt | V | kg·m2·s−3·A−1 |
| Resistance | ohm | Ω | kg·m2·s−3·A−2 |
| Frequency | hertz | Hz | s−1 |
Metric prefixes
Prefixes indicate powers of ten. Write the prefix as a multiplier before calculating, especially when values contain several prefixes.
| Prefix | Symbol | Factor |
|---|---|---|
| kilo | k | 103 |
| centi | c | 10−2 |
| milli | m | 10−3 |
| micro | μ | 10−6 |
| nano | n | 10−9 |
| mega | M | 106 |
| giga | G | 109 |
Capitalization matters: m means milli, while M means mega. Also distinguish kg from g. The SI base unit for mass is the kilogram, so converting a gram measurement to SI requires dividing by 1,000: 450 g = 0.450 kg.
Temperature and frequently used conversions
Temperature conversions require special care because Celsius and Fahrenheit scales have offsets as well as scale factors:
- Kelvin and Celsius: T(K) = T(°C) + 273.15. A temperature difference of 1 °C has the same size as a difference of 1 K.
- Fahrenheit and Celsius: T(°C) = [T(°F) − 32] × 5/9.
- Speed: 1 km/h = 1,000 m ÷ 3,600 s, so multiply a speed in km/h by 5/18 to express it in m/s.
- Length: 1 cm = 10−2 m and 1 mm = 10−3 m.
- Time: 1 min = 60 s and 1 h = 3,600 s.
Cadence and checkpoints
Build a short unit check into each physics study session rather than waiting until the end of a chapter. A useful routine has four checkpoints:
- Before solving: List the known quantities, their units, and the unit required for the answer. Convert values to a consistent system, normally SI.
- During substitution: Write units beside every numerical value. Do not enter converted numbers into a calculator while leaving the original units on paper.
- After calculating: Simplify the units algebraically. Check whether the result has the expected derived unit, such as m/s for speed or J for energy.
- At review time: Keep a running list of conversion errors. Revisit the list weekly during an active unit and before a test or lab submission.
For practical work, record the unit beside every measurement in the raw-data table. Do not rely on memory when transferring values into a graph or formula. The Physics Lab Report Guide can help connect units with data analysis and uncertainty.
How to interpret changes
Use conversion factors as equalities
Write a conversion factor so unwanted units cancel. To convert 72 km/h to m/s:
72 km/h × (1,000 m / 1 km) × (1 h / 3,600 s) = 20 m/s
The kilometres and hours cancel, leaving metres per second. This approach is safer than moving decimal points by intuition, especially when a problem combines several units.
Worked dimensional examples
Mechanics: Suppose a 2.0 kg object accelerates at 3.0 m/s2. From F = ma, the unit is kg × m/s2 = N. The force is 6.0 N.
Electricity: From V = IR, current has units A and resistance has units Ω, so Ω·A = V. If a circuit calculation produces volts when solving for current, check whether the equation was rearranged correctly; current should end in amperes.
Waves: In v = fλ, frequency has units s−1 and wavelength has units m. Their product is m/s, which matches wave speed.
Thermodynamics: In Q = mcΔT, specific heat capacity has units J/(kg·K), mass has units kg, and temperature change has units K. Multiplying them leaves joules, the unit of energy. Celsius differences can be used in place of kelvin differences because the interval size is the same.
Know what a mismatch means
A unit mismatch usually points to one of four issues: an unconverted input, a wrong formula, an algebra mistake, or a quantity being confused with a related one. For example, distance is measured in metres, while displacement is also a length but may include direction; speed is m/s, while acceleration is m/s2. A dimensional check will not identify every conceptual error, so also ask whether the result has a reasonable magnitude and sign.
When to revisit
Return to this reference at the start of every new physics topic because each area introduces familiar quantities in new combinations. Review prefixes before working with very large or small values, and revisit temperature conversions before thermal calculations. Before an exam, scan the derived-unit table and practise cancelling units in two or three representative problems rather than memorizing isolated conversion rules.
Update a personal conversion sheet when your course specification, textbook notation, or calculator conventions introduce a new unit. Keep the sheet short: include the conversions you actually use, the mistakes you have made, and one worked example from the current unit. When reviewing mechanics, pair this guide with the kinematics decision guide; for circuits, use the electricity and magnetism study guide.
Finally, make dimensional analysis a final-answer habit. Circle the requested unit before solving, show the cancellation, and compare the result with the expected physical quantity. That small checkpoint turns unit conversion from a last-minute correction into a reliable part of physics problem solving.